Stainless Steel Tube Specifications

Looking for trusted & approved suppliers in India for Stainless Steel Tube, Complete technical info for buyer of Stainless Steel Tube

Manufacturers of Stainless Steel Tube in India

Suppliers of Stainless Steel Tube, SS DIN 1.4301 Rectangular Welded Tubes, TP 304 SS ERW Tubes in Indonesia, Malaysia, Singapore, UAE, Saudi Arabia, Uman, Qatar, Turkey, Egypt, South Africa, UK, Nigeria, Kenya, Canada

Advanced Steel & Tube Mills is one of the major Indian manufacturers, exporter & suppliers of Stainless Steel Pipes & Tubes & OCTG, CRA (Corrosion-Resistant Alloy) Seamless Tubes, Stainless Steel , Super Duplex , Duplex , Welded & Semaless, Carbon Steel Seamless Pipes, Tubes, Capillary Pipes & ‘U’ Tubes for applications in oil & gas, LNG, Thermal & Nuclear Power Plants, Chemical Industries, Fertilizers Plants, (petro) chemical, shipbuilding, desalination, water treatment, energy industries, EPC and Pipes for General Engineering Purpose.


Stainless Steel Tube

  • Industry Codes
  • Industry Specifications (Spec., Material, Class, Temper, Quality)
  • Tube Properties (Material Type & Temper, Tensile PSI, Yield PSI, Elong. % in 2”, Rockwell Hardness)

Standard Stainless Tube Tolerances

  • General Service Tube
  • Heat Exchanger Tube
  • Mechanical Hollow Bar

Theoretical Bursting & Collapsing Pressures For Pipes

  • Stainless Steel (ASTM-A-312)

Stainless Steel Pipe

  • Industry Codes
  • Industry Specifications (Spec., Material, Class, Temper, Quality)
  • Tube Properties (Material Type & Temper, Tensile PSL, Yield PSL, Elong. % in 2”)

Aircraft Stainless Tube Tolerances

  • Cold Drawn Type 304-1/8 Hard
  • Annealed Type 304
  • Annealed Types 321/347
  • Special Products

Stainless Steel Tube Specifications

  • Spec. Number, Title, Scope

Designation Of Stainless Steels

  • Structure, Hardenable, AISI Type, Analyses Built Up From Basic Type

Stainless Steel Pipe Data

  • Seamless & Welded Standard Pipe Tolerances
  • Welded A409 Light Wall Pipe Tolerances
  • Welded A358 Heavy Plate Pipe Tolerances
  • Pipe Descriptions
  • Typical Propertie

Stainless Steel Tube Data

  • Chemical Composition
  • Mechanical Properties




Stainless Steel Tube Specifications

Material: Stainless Steel Pipes & Tubes

Spec. No. Title Scope
ASTM A 213
ASME SA 213		 Seamless Ferritic Stainless Steel and Austenitic Stainless Steel Boiler, Superheater, Heat-Exchanger, and Condenser Tubes. Pressure tubes, made from 16 grades of austenitic stainless steel and from 12 grades of ferritic Cr-Mo Alloy Steel.
ASTM A 249
ASME SA 249		 Welded Austenitic Stainless Steel Boiler, Superheater, Heat-Exchanger, and Condenser Tubes. Pressure tubes, made from austenitic stainless steels, (Types 304, 304H, 304L, 305, 309, 310, 316, 316H, 316L, 317, 321, 321H, 347, 347H, 348, 348H, and XM grades.)
ASTM A 268
ASME SA 268		 Seamless and Welded Ferritic Stainless Steel Tubing for General Service. 15 grades of ferritic stainless steel tubing for general corrosion resistance and high temperature service. (Types 329, 405, 409, 410, 429, 430, 430Ti, 443, 446, XMs & others).
ASTM A 269 Seamless and Welded Austenitic Stainless Steel Tubing for General Service. 13 grades of austenitic stainless steel tubing for general corrosion-resisting and high-temperature service. (Types 304, 304L, 316, 316L, 317, 321, 347, 348 and XM grades).
ASTM A 270 Seamless and Welded Austenitic Stainless Steel Sanitary Tubing. Austenitic stainless steel tubing intended for use in the diary and food industry in sizes up to and including 4 in. in outside diameter.
ASTM A 312
ASME SA 312		 Seamless and Welded Austenitic Stainless Steel Pipe. Austenitic stainless steel pipe intended for high temperature and general corrosive service. 22 grades are covered.
ASTM A 358
ASME SA 358		 Electric-Fusion-Welded Austenitic Chromium-Nickel Alloy Steel Pipe for High-Temperature Service. For corrosion and high temperature service, normally not less than 8 in. nominal diameter. Types 304, 316, 309, 310, 321, 347, 304L, 316L, 304H, 316H.
ASTM A 376
ASME SA 376		 Seamless Austenitic Stainless Steel Pipe for High-Temp Central-Station Service. Austenitic stainless steel pipe intended for high temperature and general corrosive service. Better surface than A312 pipe.
ASTM A 409
ASME SA 409		 Welded Large Outside Diameter Light Wall Austenitic Chromium-Nickel Alloy Steel Pipe for Corrosive or High Temperature Service. Nominal diameter 14-30 in. in Schedules 5S and l0S. Types 304, 309, 310, 316, 317, 321, 347, 348, 304L, 316L.
ASTM A 450
ASME SA 450		 General requirements for Alloy Steel Tubes. Common requirements for ASTM tubular specifications.
ASTM A 511 Seamless Stainless Steel Mechanical Tubing. 27 grades are covered for mechanical applications. Primarily round tubing.
ASTM A 530
ASME SA 530		 General Requirements for Carbon, Ferritic Alloy, and Austenitic Alloy Steel Pipe. Common requirements for ASTM pipe specifications as listed.
ASTM A 554 Welded Stainless Steel Mechanical Tubing. Nineteen grades are covered for mechanical applications. Rounds, squares, rectangles, and special shapes are included.
ASTM A 632 Seamless and Welded Austenitic Stainless Steel Tubing for General Service. Small Diameter. 9 grades of austenitic stainless steel tubing for general corrosion-resisting and high-temperature service.
AMS 556 Steel Tubing, Corrosion and Heat Resistant 18 Cr; 11 Ni; (Cb + Ta) (SAE 30347) Hydraulic. Annealed type 321 hydraulic line tubing. Type 1-Seamless Type 2-Welded & Drawn
AMS 5557 Steel Tubing, Corrosion and Heat Resistant 18 Cr; 11 Ni; Ti (SAE 30321)Hydraulic Annealed type 347 hydraulic line tubing. Type 1-Seamless Type 2-Welded & Drawn
AMS 5558 Steel Tubing, Welded, Corrosion and Heat Resistant 18 Cr; 11 Ni, (Cb + Ta)(SAE 30348) Thin Wall. High pressure ducting, wall thickness 2% of O.D. or less. Weld bead controlled, X-ray.
AMS 5559 Steel Tubing, Welded, Corrosion and Heat Resistant 18 Cr, 10 Ni, Ti, (SAE 30321) Thin Wall. High pressure ducting, wall thickness 2% of O.D. or less. Weld bead controlled, X-ray.
AMS 5560 Steel Tubing, Seamless Corrosion Resistant 19 Cr; 9 Ni (SAE 30304). Annealed type 304 aircraft hydraulic fine tubing. (Not subject to high pressure). Structural.
AMS 5561 Steel Tubing, Welded and Drawn Corrosion Resistant 21 Cr; 6 Ni; 9 Mn High Pressure Hydraulic. For parts and assemblies such as fluid lines subject to high pressure and requiring corrosion resistance. 1/8 - 1/4 Hard.
AMS 5562 Steel Tubing, Seamless Corrosion Resistant 21 Cr; 6 Ni; 9 Mn Annealed. Parts and assemblies requiring both corrosion and heat resistance, and having higher strength than 18-8 types.
AMS 5565 Steel Tubing, Welded, Corrosion Resistant 19 Cr; 6 Ni (SAE 30304). Annealed type 304 aircraft hydraulic line tubing. (Not subject to high pressure), Structural.
AMS 5566 Steel Tubing, Seamless or Welded Corrosion Resistant 19 Cr; 10 N (SAE 30304) High Pressure Hydraulic Cold drawn type 304, high pressure, aircraft hydraulic line tubing. 1/8 hard.
Type 1óSeamless
Type 2óWelded & Drawn
AMS 5567 Steel Tubing, Seamless or Welded Corrosion Resistant 19Cr; 10 Ni (SAE 30304) Hydraulic, Solution Treated. Fluid lines subject to medium high pressures requiring corrosion resistance. Annealed.(1) Seamless (2) Welded & Drawn
AMS 5570 Steel Tubing, Seamless Corrosion and Heat Resistant 18 Cr; 10 Ni; Ti (SAE 30321). Annealed Structural. Parts and assemblies requiring both corrosion and heat resistance especially when such parts are welded during fabrication. Requiring oxidation resistance up to approximately 1500?F, but useful at that temperature only when stresses are low.
AMS 5571 Steel Tubing, Seamless Corrosion and Heat Resistant 18 Cr; 11 Ni; (Cb + Ta) (SAE 30347). Annealed Structural. Parts and assemblies requiring both corrosion and heat resistance especially when such parts are welded during fabrication. Requiring oxidation resistance up to approximately 1500?F, but useful at that temperature only when stresses are low.
AMS 5572 Steel Tubing, Seamless Corrosion and Heat Resistant 25 Cr; 20 Ni (SAE 30310). Annealed Structural. Parts and assemblies requiring both corrosion and heat resistance especially when welded during fabrication, Requiring oxidation resistance up to approximately 2000?F, but useful at that temperature only when stresses are low.
AMS 5573 Seamless Type 316 Annealed Structural Parts & assemblies requirinq,,both corrosion and heat resistance up to 1600?F.
AMS 5574 Seamless Type 309S Annealed Structural Parts & assemblies requiring both corrosion and heat resistance up to 2000?F, especially welded assemblies.
AMS 5575 Steel Tubing, Seamless Corrosion and Heat Resistant 18 Cr; 11 Ni; (Gb + Ta) (SAE 30347). Annealed Structural. Parts and assemblies requiring both corrosion and heat resistance especially when such parts are welded during fabrication. Requiring oxidation resistance up to approximately 1500?F, but useful at that temperature only when stresses are low.
AMS 5576 Steel Tubing. Welded, Corrosion and Heat Resistant 18 Cr; 10 Ni; Ti (SAE 30321). Annealed Structural. Parts and assemblies requiring both corrosion and heat resistance especially when such parts are welded during fabrication. Requiring oxidation resistance up to approximately 1500?F, but useful at that temperature only when stresses are low.
AMS 5577 Steel Tubing, Welded, Corrosion and Heat Resistant 25 Cr; 20 Ni; (SAE 30310). Annealed Structural. Parts and assemblies requiring both corrosion and heat resistance especially when welded during fabrication. Requiring oxidation resistance up to approximately 2000?F, but useful at that temperature only when stresses are low.
AMS 5639 Seamless Type 304 Cold Finished Mechanical Tube Rockwell 90B max Hardness Corrosion Embrittlement Capability
AMS 5645 Seamless Type 321 Cold Finished Mechanical Tube Rockwell 90B max Hardness Corrosion Embrittlement Capability
AMS 5546 Seamless Type 347 Cold Finished Mechanical Tube Rockwell 90B max Hardness Corrosion Embrittlement Capability
AMS 5647 Seamless Type 304L Cold Finished Mechanical Tube Rockwell 90B max Hardness Corrosion Embrittlement Capability
AMS 5648 Seamless Type 316 Cold Finished Mechanical Tube Rockwell 90B max Hardness
MIL-T-5695 Tubing, Steel, Corrosion Resistant, (304) Cold Drawn (1/2 or 1/4 Hard) Smls or W&D. Intended for use in the fabrication of aircraft structural parts requiring a high degree of resistance to corrosion.
MIL-T-6737
(T 321)		 Tubing, Steel, Corrosion and Heat Resistant (18-8 Stabilized), Welded.Annealed. Type 321 and 347 tubing intended for use in the manufactured exhaust-stacks, manifolds, blast tubes, ring collectors and similar applications where a weldable corrosion and heat resisting steel is required or for use at 8000 - 1500?F.
MIL-T-6845
(T304)		 Tubing, Steel, Corrosion Resistant (304) Aerospace Vehicle Hydraulic System. 1/8 Hard, Seamless, Welded & Drawn. Intended for use in high pressure hydraulic and pneumatic systems in which corrosion resistant materials are required. The tubing is not suitable for use in applications assembled by welding or brazing or exposed to temperatures higher than 800?F, because of impaired resistance to corrosion, where subsequent anneal not possible.
MIL-T-8504
(T 304)		 Tubing, Steel, Corrosion Resistant (18-8) Annealed, Aircraft Hydraulic System. Seamless, Welded. Intended for use in high pressure hydraulic and pneumatic systems in which corrosion resistant materials are required. This tubing is of lower strength and higher ductility than tubing to Specification MIL-T-6845. May be used to replace MIL-T-6845 tubing but heavier wall thicknesses must be used:Same qualifications regarding welding, brazing & temperature.
MIL-T-8506
(T 304)		 Tubing, Steel, Corrosion Resistant, (304) Annealed, Seamless, Welded. Intended for use in the fabrication of aircraft parts requiring a high degree of resistance to corrosion. Not to be used in high pressure hydraulic control systems.
MILT 8606
(T 304L)
(T 321)
(T 347)		 Tubing, Steal, Corrosion Resistant (18-8 Stabilized). Annealed. Seamless, Welded & Drawn. Intended for use in applications which require a high degree of resistance to corrosion or to temperatures in the range of 800?F-1500?F. or in applications which involve welding. Suitble for use in tank-automotive equipment for hydraulic and mechanical applications.
MlL-T-8808
(T 321)
(T 347)		 Tubing, Steel, Corrosion Resistant (l8-8 Stabilized), Aircraft Hydraulic Quality. Annealed, Seamless, Welded & Drawn. Intended for use in high pressure hydraulic and pneumatic systems where corrosion and heat resistance are required and in which welding or brazing may be involved during fabrication. Resists oxidation at temperatures to 1200?F, but is useful at that temperature only when stresses are low.
MIL-T4973
(T 304L)
(T 316L)
(T 321)
(T 347)		 Tubing, Steel, Corrosion Resistant, Aerospace Vehicle Hydraulic System. 1/8Hard. Seamless, Welded & Drawn. Intended for use in high pressure hydraulic and pneumatic systems where corrosion and heat resistance are required and in which welding or brazing may be involved during fabrication. Suitable for use in temperatures to 1200?F, when stresses are low.
MIL-P-1144
(T 304) (T 304L)
(T 316) (T 316L)
(T 321) (T 347)		 Pipe, Stainless Steel, (Corrosion Resisting). Seamless or Welded. Annealed. Pipe is intended for high-temperature and hydraulic br other pressure service under general corrosive conditions.

Packaging & Shipping

Utmost care is taken towards Packing of the finished products so as to ensure that the resultant Coils, Foils, Tubes, Pipes and Fittings reach in the same condition as desired by our valued customers.
Packing specifications for various products are:

  • Larger Dia Fusion Welded Pipes are packed with aluminium end caps in a wooden crates.
  • S.S. Automotive Exhaust Pipes & Scheduled pipes both are packed with plastic end caps in wooden crates.
  • Cold Drawn Seamless Stainless Tubes are packed with plastic end caps in a wooden box with an inside thermocoal covering.
  • Coils and Foils are packed in wooden crates.

steel-pipe-tube-packed.jpg

Stainless Steel Tube Packed

Stainless Steel Tube Packaging

Stainless Steel Tube Packed

Other Packaging information :

  • Bundle Packing
  • Bundle Packing
  • Wooden Case
  • Wooden Case
  • Wooden Case for U Tubes
  • Reinforced by angle bar

Why us?

  • Stainless Steel Seamless Pipes & Tubes Manufacturer since 2004
  • The annual capacity of the plant equals about 8.000 tons
  • Specialized in Pipes & Tubes, Stainless Steel Pipe & Carbon Steel Pipe
  • We export seamless tubes / welded tubes everywhere in the world
  • We have our own warehouse of 10,000 feet, so we can offer best price in the market
  • Supplier and trader of IBR Materials like IBR approved Pipes, IBR Certified Tubes

Highlights :

  • Pipes up to 24" made in continuous production from coil
  • Pipes up to 80" made from single plates
  • Maximum thickness 40 mm

Strength :

  • Contacts with major mills & stockists around the world.
  • Can offer ex-stock materials as well as mill delivery with nominal margins.
  • Complete in-house testing facilities viz. hydro, eddy current, UT, chemical analysis,
  • physical/mechanical, PMI, microscopic examination, etc…
  • Prime and genuine materials with co-relating original test certificates.


Available Stock at Advance Steel & Tube Mills

Pipes & Tubes Stock At a Glance:-
Pipe Gradewise Stock At a Glance:-
Tube Gradewise Stock At a Glance:-
Nickel Alloys Pipes & Tubes Stock At a Glance:-
Top Sellers Pipes & Tubes At a Glance:-
List of Countries where Advance Steel & Tube Mills supply Pipes & Tubes:-
List of Countries where Advance Steel & Tube Mills supply Pipes / Tubes :-


Our Sell Representative in below Cities :

Mumbai, Bengaluru, Chennai, New Delhi, Pimpri-Chinchwad, Hyderabad, Pune, Kolkata, Navi Mumbai, Ahmedabad, Noida, Vadodara, Coimbatore, Thane, Chandigarh, Indore, Dammam, Surat, Bhopal, Faridabad, Rajkot, Ernakulam, Secunderabad, Thiruvananthapuram, Howrah, Visakhapatnam, Ludhiana, Haryana, Houston, Dubai, Seoul, Singapore, Abu Dhabi, Tehran, Calgary, Riyadh, London, Jakarta, Istanbul, Bangkok, Kuwait City, Sharjah, Muscat, Edmonton, Busan, Mexico City, Doha, Jeddah, Aberdeen, Cairo, Geoje-si, Perth, Santiago, Kuala Lumpur, Rio de Janeiro, Melbourne, Madrid, Ulsan, La Victoria, Bogota, Lahore, Los Angeles, Algiers, Chiyoda, Ankara, Ho Chi Minh City, Toronto, Moscow, Dallas, Colombo, Hong Kong, Brisbane, Petaling Jaya, Gimhae-si, Al Jubail, Port-of-Spain, Milan, Lagos, Hanoi, Ahvaz, Karachi, New York, Caracas, Vung Tau, Al Khobar, Manama, Montreal, Granada, Courbevoie, Sydney


Our Sell Representative in below Countries :

India, Italy, Canada, Pakistan, Chile, Thailand, Spain, France, United Kingdom, Indonesia, Israel, Iran, Hungary, Kuwait, Hong Kong, Mexico, Nigeria, Serbia, Brazil, Venezuela, Singapore, Taiwan, Ecuador, Saudi Arabia, Netherlands, Colombia, Ghana, Iran, Denmark, Poland, Afghanistan, United Arab Emirates, Bahrain, Costa Rica, Egypt, Jordan, South Korea, Kazakhstan, Chile, Qatar, Sri Lanka, Lithuania, Norway, Oman, Mongolia, Philippines, Poland, Russia, Vietnam, Turkey, South Africa, Mexico, Iraq, Algeria, Australia, Angola, Argentina, Austria, Azerbaijan, Bangladesh, Belarus, Belgium, United States, Bhutan, Bolivia, Finland, Bulgaria, Croatia, Czech Republic, Estonia, Greece, Libya, Romania, Trinidad & Tobago, Tunisia, Ukraine, Yemen, Gabon, China, Portugal, Switzerland, New Zealand, Slovakia, Kenya, Peru, Lebanon, Morocco, Malaysia, Japan, Nigeria, Sweden


Our Available Products Of Stainless Steel TP 304 Pipes & Tubing

»   Stainless Steel TP 304 Seamless Pipes
»   Stainless Steel TP 304 Seamless Tubing
»   ASTM A213 Stainless Steel Welded Pipes
»   A249 SS TP 304 Welded Tubes Suppliers
»   ASTM A358 304 Stainless Steel ERW Pipes Manufacturer
»   A312 SS 304 Rectangular Seamless Pipes Manufacturer
»   ASTM A213 304 Stainless Steel Rectangular Tubes
»   TP 304 Stainless Steel ERW Tubes Distributors
»   UNS S30400 Stainless Steel Coiled Seamless Tubing
»   Top Quality Stainless Steel TP 304 Heat Ex-changer Tubes
»   Stainless Steel DIN 1.4301 Round Tubing Exporter
»   ASTM A213 304 Stainless Steel Square Seamless Pipes
»   ASME TP 304 Stainless Steel Electric Fusion Welding Pipes

»   TP 304 SS EFW Tubing Stockiest in India
»   Stainless Steel JIS SUS 304 Cold Rolled Coiled Tubing
»   ASTM A269 304 Stainless Steel Tubing
»   SS 304 Austenitic Stainless Steel Pipes & Tubes
»   TP 304 Stainless Steel LSAW Pipes Dealers
»   ASTM A213 Stainless Steel TP 304 Capillary Tube
»   Stainless Steel 304 U Shaped Tubing Stockholder
»   TP 304 Stainless Steel Hydraulic Tubes Suppliers
»   A213 SS 304 Electric Resistance Welding Pipes Suppliers
»   Stainless Steel ASTM A213 TP 304 Welded Tubing
»   AISI Stainless Steel ASTM A213 304 Seamless Tubing
»   SS ASME SA 249 TP 304 Welded Tubes Exporter
»   TP 304 Stainless Steel Instrumentation Tubes Exporter

Our Products